Chimney Sweep & Dryer Vent Cleaning in Great Falls, VA
A-1 Chimney Sweep & Dryer Vent Services serves homeowners throughout Great Falls, from the Great Falls Village Centre area to the larger properties along Georgetown Pike and Walker Road. We are a veteran-owned company based in Springfield. Many Great Falls homes have large masonry chimneys and wood-burning fireplaces that see heavy use every winter, so yearly sweeping and inspection really matter here. We sweep and inspect chimneys, repair crowns and masonry, install caps and stainless steel liners, and clean and repair dryer vents. Call (703) 296-7636 to schedule service in Great Falls.
Dryer Vent Cleaning & Repair in Great Falls, VA
Great Falls homes are often large houses on wooded lots, and many have long dryer vent runs from a basement or upstairs laundry room. Wooded lots also mean leaves, pollen and nesting birds can block the exterior vent cover. When a vent is clogged, clothes take longer to dry and the dryer runs hotter than it should. We clean and inspect the full vent line, clear blocked exterior covers, replace old or damaged duct with metal duct, and repair or replace exterior vent hoods. Call (703) 296-7636 for dryer vent service in Great Falls.
CHIMNEY INSPECTIONS
The National Fire Protection Association (NFPA) recommends chimneys be inspected annually and cleaned as needed. Having your chimney inspected before lighting your first fire of the season is the #1 way to prevent potential damage to your home or even the loss of life that may result from a damaged or blocked chimney.
Level 1 Inspection
A Level 1 Inspection is considered the most standard of inspections, and is conducted with simple tools: a flashlight and the naked eye. During a Level 1 Inspection, we’ll simply take a quick look in your chimney and make sure that there are no visible blockages or damages. Typically, this is the level of inspection you would have if your system was working normally, without problem and without change.
Level 2 Inspection
A Level 2 Inspection is a bit more thorough, and requires the use of a chimney camera. Here at A-1, we use the chimney inspection camera to get a close-up view of the interior of the chimney, from top to bottom. We’ll examine every aspect of the chimney and appliance that is easily accessible, and check for any damages, defects, blockages, or other problems or weaknesses. A Level 2 Inspection is required upon the sale or transfer of a property; when a change is being made to the system (i.e. new appliance, new fuel type, new liner, etc.); when a natural disaster may have impacted the system (i.e. tornado, earthquake, strong storm, etc.); when there has been a building or chimney fire; or when the system is showing signs of problems.
Level 3 Inspection
A Level 3 Inspection is really a last resort because it may involve the removal of parts of the chimney system or home. If we can’t locate or identify the problem with a Level 1 or Level 2 Inspection, a Level 3 Inspection gives us access to concealed areas of the chimney so we can find and fix the problem.
Chimney Camera Inspections
Why do chimneys need to be cleaned?
​
Burning items like wood can create byproducts like creosote or soot in your fireplace. Creosote condenses on the walls of your chimney when hot gasses meet the flue’s colder surface. This condensed material is highly flammable under the right conditions and can easily turn your chimney into a serious fire hazard.